bing tracking image

Acura Roof Rack Installation And Review Videos

  

Yakima Roof Rack Review - 2016 Acura MDX- Video

Yakima Roof Rack Review - 2016 Acura MDX

Speaker 1: Today on our 2016 Acura MDX we're gonna be test fitting the Yakima CoreBar Roof Rack System. These are the Yakima crossbars, 60" long; these are the baseline towers; and this is the clip fit kit for the Acura MDX.The Yakima CoreBar Roof Rack System is great for carrying a wide variety of accessories on your roof, or freeing up space inside your vehicle. It can carry bike racks, cargo baskets, cargo boxes, as well as ski and snowboard carriers, and kayak carriers. The two bars have a combined carrying capacity of 220 pounds, although you always have to double check with your vehicle's manual to make sure your roof can withstand that weight. And at our end caps here we have these knockouts, which you can replace with the Yakima Same Key System, so both your accessories and your roof rack can be keyed alike and secured to your vehicle.Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We already have our front bar installed on our vehicle, and we have our rear bar partially assembled. more


Watch Video

11/6/2017 12:17:34 PM



Inno Aero Bar Installation - 2015 Acura TLX- Video

Inno Aero Bar Installation - 2015 Acura TLX

Today on our 2015 Acura TLX, well be taking a look at the Inno Roof Rack System. This is going to consist of the Inno Arrow Crossbars, part number INXB1082. The Inno Flush Feet for Arrow Crossbars, part number INXS200, and the Custom Fit Kit for the Flush Feet, part number INK668. The Inno Arrow Crossbars are a low-profile crossbar, which is going to have an aerodynamic design, which will reduce wind noise and drag. Its going to have the integrated T-slots at the top that will easily allow you to slide channel-mounted carriers and accessories onto the bars. These will also work with clamp-on accessories. The rubber strips in the top are going to help to keep out dirt and debris. more


Watch Video

2/17/2017 11:17:51 AM



Rhino Rack Roof Rack Review - 2011 Acura MDX- Video

Rhino Rack  Roof Rack Review - 2011 Acura MDX

Today on our 2011 Acura MDX we're doing a test fit of the Rhino Rack RS2500 series roof rack system. These are vortex aero cross bars. The part number for this is RRRS475B. Now this is the whole kit that fits our Acura here. It comes with our cross bars and our foot pack attached to each other and then our fit kit. We already have our front one installed, we're going to show you how to install our back one here. more


Watch Video

7/18/2016 5:30:35 PM



Rhino Rack Roof Rack Review - 2016 Acura MDX- Video

Rhino Rack  Roof Rack Review - 2016 Acura MDX

Today on our 2016 Acura MDX we'll be doing a test fit of the Rhino-Rack Vortex Aero Crossbar System, using part numbers RRVA137B-2 for the 54" Black Aluminum Crossbars, and then part number RRRLKVA for the 2500 Series Leg Kits, and then part number DK400 for the clamps and the pads. We've already got the front one installed as you can see here. We followed our instructions, we came from the door jam over to the center, we measured out the distance and how far we're supposed to be for our legs underneath the bars, and then we tightened everything up, and we got it. So let's go ahead and do the rear one together. First thing we'll do is we'll grab the leg first, and then our pad. We want to make sure that the arrow is pointing out, so away, and then we're going to push that on the bottom. Make sure that it seats all the way around. more


Watch Video

4/14/2016 11:38:03 AM



Rhino Rack Roof Rack Review - 2011 Acura MDX DK173- Video

Rhino Rack  Roof Rack Review - 2011 Acura MDX DK173

Today on our 2011 Acura MDX, we're doing a test fit of the Rhino-Rack Vortex Aero Crossbars. The part number for our crossbars today is RRVA137B-2. For the foot pack we're using it's RRRLKVA. For our fit kit for our MDX, we're using DK173. We already have our front bar in place, as you can see there. We've got our one foot pack here installed and in place. We're going to do our other one on the other side. more


Watch Video

3/29/2016 10:06:08 AM



Inno Roof Rack Review - 2012 Acura TSX- Video

Inno  Roof Rack Review - 2012 Acura TSX

Today, on out 2012 Acura TSX, we're doing a test fit of the Inno Square Crossbars. Part number I-N-B-1-2-7 for a crossbar. For our Foot Pack, is I-N-S-U-K-5. For our Fit Kit designed for the Acura, it's going to be I-N-K-5-7-8. We've already got our front crossbar on, and 1 of our feet on. We're going to show you how we assemble the foot pack first. We'll take our clamp, or rubber piece and we'll just fit it on. more


Watch Video

11/3/2015 8:22:38 AM



Yakima Roof Rack Review - 2016 Acura MDX- Video

Yakima  Roof Rack Review - 2016 Acura MDX

Today on our 2016 Acura MDX, we're going to be doing a test fit of the Yakima roof rack system. It's going to be part number Y00409, Y00124, and finally part number Y00731. As you can see, we've already got the first one up on the vehicle. That's going to be spaced off that front windshield 6" with an inside measurement from each Q Tower of 48". We'll explain how the second one goes together and the final measurements you need to make. The bar here is going to be your part number Y00409. You're going to have your Q Towers, which are going to be part number Y00124; and then finally, your fit kit for the vehicle specific, which is going to be part number Y00731. As you can see, we've already got one side on. more


Watch Video

7/2/2015 8:32:56 AM



Thule Roof Rack Review - 2007 Acura MDX- Video

Thule  Roof Rack Review - 2007 Acura MDX

Today on our 2007 Accra NDX, we're going to be doing a test fit of the Tuley Arrow Blade Refrac system like the one up here on top of the vehicle that we've already installed. We're going to go through on how to install the back one, and a few measurements along the way. These are going to be part number THARb60 for your arrow blade, TH480R for your pedestals, and for your fit kit for the vehicle specific, it's going to be THKIT1549. We'll also be using the included tool, which is your accutight tensioner and Allan key, and a piece of tape rule. We'll go ahead and flip it over, and I'll show you what we got going on here. This is what it will look like, once it's installed onto our bar. With your clip here, that's going to clip underneath your windowsill, your rubber mat which is part of that kit, as well, that's going to sit down on top of the pane to protect it. more


Watch Video

4/22/2015 9:22:15 AM



  1